IME Forms Chip-On-Wafer Consortium

Chip-on-wafer technologyChip-on-wafer technology could pave the way for higher-performance, slimmer and more cost-effective electronic devices.

Conventional Chip-on-Wafer bonding techniques used for making 3D chipsets rely on a solder-assisted thermo-compression bonding process that takes more than 15 seconds at a minimum of 300 degrees Celsius to complete. This method, which attaches the chip to a piece of semiconductor wafer, slows the overall production process and results in higher manufacturing costs.

AsianScientist (Dec. 29, 2014) – A*STAR’s Institute of Microelectronics (IME) has formed a Chip-on-Wafer (CoW) Consortium to enable semiconductor firms to develop commercially-viable capabilities for making 3D chipsets.

The consortium is working on overcoming such challenges by using low temperature copper-copper (Cu-Cu) diffusion bonding.

Read more at: http://www.asianscientist.com/2014/12/academia/ime-forms-chip-on-wafer-consortium/

Self-arranging Molecules Could Form The Basis For Efficient Optoelectric Memory Devices

Self-arranging Molecules Efficient Optoelectrical Memory DevicesA way to use weak molecular bonding interactions to create well-ordered and stable metal–organic monolayers with optoelectronic properties has been found by researchers from the RIKEN Surface and Interface Science Laboratory. The development could form the basis for the scalable fabrication of molecular optoelectronic devices.

A variety of emerging technologies are being investigated as potential replacements or enhancements of the electrical-charge-based electronics that lie at the heart of all electronic devices.

To read this article in its entirety go to: http://phys.org/news/2014-12-self-arranging-molecules-basis-efficient-optoelectronic.html

Smartphone Wars May Bring Increased Need for Sapphire and Aluminum Soldering Solutions

Smartphone GlassSapphire crystals play a key role in protecting various electronics from environmental conditions, as the material is one of the most scratch-resistant available. In fact, the latest Apple smartphone, the iPhone 5S uses it as protection both for the camera lens as well as the fingerprint scanner that is now incorporated into the front face.

It has been posited that Apple might use the crystal, synthetically produced, for the screen of the iPhone 6. The crystal is even stronger and more resistant to strikes than Corning’s Gorilla Glass, currently the standard for smartphones from a variety of manufacturers. One key concern is cost, and an Apple partner has reportedly streamlined the process. With phones and other products, another key is aluminum soldering or joining sapphire to other materials.

While many companies make electronics relatively easy to take apart to make repairs and replace components, the tech giant has a history of making closed systems. If that is the case, then joining the screen to the frame of the case could improve rigidity and limit deformation from falls or other accidents. Perhaps more importantly, any reduction in the price of sapphire display screens could spur its usage in other industries.

As noted above, phone makers already take advantage of the material to protect camera lenses, yet it is also commonly used in the production of lasers and in high-risk environments for sensor arrays, such as on oil rigs or for equipment that must take the brunt of sand, wind and other things that can degrade surfaces relatively quickly. If GT Advanced Technologies can decrease the costs of production, it stands as a material nearly as scratch-resistant as synthetic diamonds and far superior to

This will improve opportunities to make stronger electronics, but at the same time engineers will need to consider aluminum soldering options and other joining materials that can be used in low-temperature processes. Otherwise, they will be limited in designs based on differences in coefficients of thermal expansion between materials.

The report is available on the possibility of sapphire crystal production used in the upcoming iPhone 6.

3D Printing, Masking, and Aluminum Soldering

3D Printed Circuit Board3D printing seems to grow ever more popular year by year. Research and development into this field is growing at a rapid pace and expanding into new frontiers. While it is most commonly used for plastics and prototyping, some companies have been expanding the applications to include solder masking. One manufacturer seems to have made a significant advance with the use of imprint lithography to affix transistors to substrates. One offshoot of that may be the necessity for joining dissimilar materials using techniques such as aluminum soldering. Continue Reading 3D Printing, Masking, and Aluminum Soldering